RLA Polymers

Primers and Additives

RLA Uniflex - Flexible Mortar Additive

Product Description Data Sheet VOC Report MSDS Specification

Uniflex Flexible Mortar Additive

RLA Uniflex

Uniflex is an acrylic polymer designed for use in cement based mortars to provide flexibility, enhanced strength, adhesion and resistance to chemicals, vibration and thermal movement.

  • Uniflex can be used internally and externally for all tile and stone types that are not sensitive to water, including applications that are subject to total immersion.

Main uses:

  • As a primer prior to tiling or plastering
  • Slurry bonding coat
  • Plasticiser for mortars
  • Flexiblising mortars and adhesives
  • Modifier for cement based tile adhesives and grouts for applications such as: heated floor slabs, concrete floors subject to thermal movement, fibre cement sheeting and repared vinyl
  • As a primer to reduce porosity of the substrate and to provide a separating layer
  • As a bonding coat or slurry immediately prior to application of a tile adhesive or sand mortar to provide exceptional adhesion to the substrate.
  • As an additive to the cement mix
  • Uniflex can be added as a partial or complete replacement of the gauging water.
  • Amongst the advantages conferred by the inclusion of Uniflex are - improved workability, improved adhesion, improved toughness and flexibility, reduced dusting, improved resistance to chemicals, improved water and frost resistance and reducing salt migration (efflorescence).
  • Sizes 5L, 20L and 200L

TDS

-

-

-

 

Primers and Additives are distributed by Flexco (NZ) Ltd

 
 
© Copyright RLA Polymers NZ Ltd, 2009 - 2017 .   Phone: (09) 267 2772  
Address: 24-28 Lady Ruby Drive, East Tamaki, Auckland. PO Box 64207, Botany, Auckland 2163, New Zealand.