RLA Polymers

Self Levelling Compounds

A full range of levelling products suitable for fixing both concrete and wooden sub floors

Self Levelling Compound
> View Product Table

Our technical department is continuously developing new products for the ever changing building industry. A good product is just the beginning of successfully installing floor preparation, sound knowledge and advice of their application abilities is the key. RLA Polymers have onsite technical personnel ready to assist you in specifying your next project.

Self Levelling

Our self levelling compounds are designed to find their own levels when installed at a thickness of 3mm or greater. We have a high performance levelling compound that can be installed to any thickness and can be walked on within a little as 2-3 hours! These products are ideal for the preparation of sub floors prior to the laying of vinyl, carpet, wood, ceramic tiles, or any floor covering requiring a level substrate. We also manufacture a levelling compound suitable for installation of under floor heating wires.

Patching Compounds

We manufacture these products for repairing and patching of concrete substrates. These products are extremely fast setting and can be installed on in as little as 1 hour following application. Ideal for ramping to form shower bases, repairing stair edges, or general patching of concrete sub floors prior to installation of most floor coverings.

Self Smoothing

These are highly polymer modified, 2-part systems designed for problematic substrates that display a need for a screed able to withstand some degree of flexibility. A common application of this product type is for over top of wooden substrates such as particle board floors. It is extensively used for application of under floor heating systems over particle board floors. Being a 2-part system, it displays an ability to be somewhat resistant to moisture.

Fine Patching

We have formulated this product type to be a quick, easy solution to patching a reasonably good substrate that requires minimal preparation. Being a highly polymer modified product it requires no priming and dries extremely fast.

Priming

Priming is a critical part in any substrate preparation and RLA Polymers recognize the need for good priming systems. We manufacture various primers for many substrate surfaces from very porous floors to extremely hard impervious surfaces. Priming is essential to improving adhesion and minimizes any bubbling of compounds.

 
Product Compound Description Data Sheet VOC Report MSDS Specification

20 Bulk Fill

Roberts Bulk Fill 20 is a high build cementitious underlayment, specifically formulated for preparation of concrete sub floors prior to the laying of floorcoverings. Not Suitable for use directly under Vinyl floorcoverings without the use of Self Leveller.

The specially selected cements and polymers contained in Bulk Fill 20 produces a fast setting underlayment with exceptional adhesion to most prepared flooring materials.

TDS

-

-

-

Super Level 30

30 Super Level

Roberts Super Level 30 is a self-smoothing cementitious underlayment when installed 3mm or above, specifically formulated for preparation of concrete sub floors prior to the laying of vinyl, carpet and tile floorcoverings.

The specially selected cements and polymers contained in Super Level 30 produces a fast setting underlayment with exceptional adhesion to most prepared flooring materials.

TDS

-

-

-

34 Super Primer

34 Super Primer

Roberts 34 Super Primer is a two-part water based modified epoxy primer designed for priming Non-Porous floors such as ceramic tiles, terrazzo, painted or epoxy surfaces, and sealed or burnished concrete floors prior to the application of cementitious underlayment.

TDS

-

-

-

35 Fine Patch

35 Fine Patch

Roberts Fine Patch 35 is a fast drying cementitious underlayment designed for smoothing ridges, patching cracks or holes and feather edge transitions.

TDS

-

-

-

38 Flexiscreed

38 Flexiscreed

Roberts Flexiscreed 38 is a partially self smoothing cementitious underlayment when installed 2mm or above, specifically formulated for preparation of sub floors prior to the laying of vinyl, carpet and tile floorcoverings where some degree of flexibility is required. E.g. Under floor heating.

The specially selected cements and polymers contained in Flexiscreed 38 produces a fast setting underlayment with exceptional adhesion to most prepared flooring materials.

TDS

-

-

-

Rapid Patch 40

40 Rapid Patch

Roberts Rapid Patch 40 is a fast setting cementitious mortar, specifically formulated for quick and reliable repair of damaged concrete floors, patching stairs and forming ramps.

TDS

-

-

-

Primer 41

41 Primer

Roberts 41 Primer is a co-polymer acrylic emulsion designed to prime absorbent internal concrete substrates prior to the application of Roberts cementitious compounds. It improves adhesion and eliminates or minimises bubbling in the finished compound.

For Non-Porous substrates use Roberts 34 Super Primer.

TDS

-

-

 

Additive 45

45 Additive

Roberts 45 additive is a modified synthetic latex compound for adding to Roberts cement underlay powders to improve tensile strength and adhesion.

TDS

-

-

-

-

570 Water Based
Epoxy Sealer (Grey)

Roberts 570 is a grey two-part water-based epoxy sealer for concrete, masonry, fibrocement and other cementitious surfaces.

Roberts 570 may be mixed in equal parts by either weight or volume.

-

-

-

-

 

 
© Copyright 2009 - 2012 RLA Polymers PTY Ltd.   P: +64 (9) 267 2772  
A: 67 Dalgety Drive, Manukau City, Auckland. PO Box 97-575, South Auckland Mail Centre, New Zealand