RLA Polymers

Solvent Based Contact Adhesives

RLA manufactures and stock a range of adhesives for the construction industry.

Adhesive Description Data Sheet VOC Report MSDS Specification

N102L

Anchor-Weld N102L Laminate Contact Adhesive solvent based (flammable), is a high solids, high heat resistant roller/brush grade adhesive specifically formulated for use with a number of materials.

TDS

-

MSDS

-

N150

Anchor-Weld N150  Contact Adhesive is a solvent based (flammable), high solids, high heat resistant spray grade adhesive, specifically formulated to stay in solution in hot and cold conditions.

TDS

-

MSDS

-

N177

Anchor-Weld N177 Clear Contact Adhesive solvent based (flammable), is a high solids, heat resistant spray grade adhesive, specifically formulated to stay in solution in hot and cold conditions.
Anchor-Weld N177 Clear has a lower viscosity than Anchor-Weld N150 to enable it to be used with low volume spraying equipment.

TDS

-

MSDS

-

R900

Roberts 900 Contact Cleaner is a specifically formulated solvent blend ideally suited for cleaning off dried water based and solvent
based adhesive from tools and equipment.

It can also be used as a thinner for contact adhesives, but is not recommended for thinning, water based acrylic or latex based adhesives.

TDS

-

MSDS

-

 

 
© Copyright RLA Polymers NZ Ltd, 2009 - 2017 .   Phone: (09) 267 2772  
Address: 24-28 Lady Ruby Drive, East Tamaki, Auckland. PO Box 64207, Botany, Auckland 2163, New Zealand.