Flooring Adhesives

Butylseal Tape is a grey butyl rubber tape with excellent elongation properties and a degree of memory. It does not shrink and is permanently flexible. It is non-soluble and waterproof and can be painted and plastered over.

Eco-SiMP Flooring is a one-part, solvent free wood flooring adhesive, notable
for its low health and environmental impacts.
Ideal for the full-surface bonding of multiple-layer pre-finished parquet, wood
planks, lamp parquet, mosaic and laminates on screeds and pre-existing wood,
ceramic or marble flooring where environmental impacts must be kept low.

S-Bond Flex is a one-part, solvent free, high-elasticity wood flooring adhesive
based on silyl modified polymer technology.
Ideal for full-surface bonding of multi-layer pre-finished parquet, solid and
engineered wood floors and chipboards on screeds or pre-existing wood, ceramic
or marble flooring. It is ideally used with stable woods. Suitable for use over underfloor
heating systems.

U-Bond X-Treme is a one-part solvent-free polyurethane wood flooring adhesive.
Displays extreme mechanical properties and bonds, consolidates and waterproofs
simultaneously. Ideal for full surface bonding of lamp parquet, solid wood with
and without tongue and groove, mosaic, industrial woods, laminates, and multiplelayer
pre-finished woods on screeds or pre-existing flooring with ceramic, wood, or
marble floor tiles. Suitable for use over under-floor heating systems.

DESCRIPTION

Polymer 160 is a latex based pressure sensitive adhesive offering economy, prolonged open time and excellent adhesive properties.

USES

Polymer 160 is useful for multiple applications, including but not limited to: double-stick underlay installation, direct-stick carpets, seagrass and coir installations, and commercial (high mineral content) vinyl tiles.  It is particularly suited to lower temperature installation (between 3 - 10^oC) where acrylic type products are very slow to tack up.

 

Polymer 265 is an acrylic emulsion adhesive with excellent plasticiser resistance and
non-staining properties. It is protected against bio-degradation, withstands normal wet
cleaning practices and is suitable for use over underfloor heating installations.
Polymer 265 is designed for bonding plasticised vinyl floor and wall coverings and
specialized (including PVC back) and general direct stick carpets. Also recommended
for bonding cork tiles and sheet to sound, smooth, dry subfloors of concrete; conventional
sand/cement screeds; plywood; hardboard or cement sheet underlays. Other surfaces,
such as asphalt, terrazzo, quarry tiles and concrete surfaces treated with waterproof
membranes or some curing agents should be skimmed with a minimum of 3mm of a
proprietary cementitious underlayment as per manufacturer’s recommendations.

Primer for use with Polymer adhesives on cementitious/wood or other absorbent substrates .Cost-effective co-polymer acrylic emulsion for priming absorbent substrates prior to the application of water-based adhesives.

Polymer 999 is a solvent free, acrylic, water-based
pressure sensitive adhesive with good strength and
aggressive tack. Polymer 999 is designed to provide
maximum slip and shear resistance while promoting ease of uplift at a later date.
TO:
Most common building substrates including concrete,
cementious screeds, plywood, particle board,
hardboard or cement sheet underlays.

RL 20G is a grey two-part water-based epoxy sealer for concrete, masonry, fibrocement and other cementitious surfaces. RL 20G may be mixed in equal parts by either weight or volume.

RL 20G is a grey two-part water-based epoxy sealer for concrete, masonry, fibrocement and other cementitious surfaces. RL 20G may be mixed in equal parts by either weight or volume.

Roberts 18 Conductive Vinyl Adhesive is a waterbased, carbon filled acrylic adhesive specifically formulated for the installation of conductive vinyl floorcoverings. It has high initial grab and is ideal for bonding unsupported conductive, static dissipative, and some antistatic commercial vinyls. It is not recommended for linoleum. Note: The decision to use a conductive adhesive should be ascertained from the vinyl flooring manufacturer. Some Antistatic materials do not require a conductive adhesive. 

Roberts 5216 is an extrudable solvent based neoprene contact type adhesive. This adhesive has good water and heat resistance.

 

 Carpet seam edges together where carpet is either directly bonded to the floor or double bonded over underlay

Adhesive Softener. Softens cured adhesives, For use with solvent based adhesives.

DESCRIPTION:
ROBERTS Two Part Resilient Flooring Adhesive is a flexible,
water-resistant adhesive and, once cured, forms a strong
bond that displays high peel and shear strength in wet and
dry areas.
INTERNAL & EXTERIOR USE.
RECOMMENDED USE:
• Commercial Sheet Vinyl
• Vinyl Planks
• Rubber Floorcoverings.

Roberts 6037 Outdoor Grass Carpet Adhesive is an all-weather solvent based (flammable) adhesive specifically formulated for the outdoor installation of non-stretch open weave polypropylene backed synthetic grass carpet. Not recommended for urethane and E.V.A. backed carpets.

R80 is a high-solids, latex-based, fast-tack carpet adhesive, designed for adhering hessian, latex-backed and woven carpets. Suitable for both direct stick and double-bond applications.

Roberts 16 is a highly water resistant, self smoothing, self levelling cementitious compound specifically designed for repairing and resurfacing both interior and exterior concrete surfaces.

High performance: up to 15mm per application, suitable for external applications, suitable for underfloor heating.

Roberts Fine Patch 35 is a fast drying cementitious underlayment designed for smoothing ridges, patching cracks or holes and feather edge transitions.

Subflooring Sealing - Healthcare

Roberts Rapid Patch 40 is a fast setting cementitious mortar, specifically formulated for quick and reliable repair of damaged concrete floors, patching stairs and forming ramps.

SL30 is a self levelling cementitious underlayment intended for interior use. It is formulated for preparation of concrete subfloors prior to the installation of timber, vinyl, carpet and tile floor coverings. The specially selected polymers and cements in Super Level 30 produce a fast-setting underlayment with exceptional adhesion to most prepared surfaces.